CCL Programing Code For CCL108
/ CCL308 / CCL412 / CCL416 / CCL108SU

				
					CCL 108 PBX
...........
1.Default Ext Numer Start 601 To 608

2.Default Password:- #*0000

3.Password Change :- #*0000 09 3055 #
..................................... 
<Note: 3 Beep Means Password Enter Rong 1 Beep For Right Password>
<3055 Means New Password>
<09 For Code Password Changing Enter Mode>

4.Flexible Number Reset :- #*3055 90000 #
..........................................
<Felexible Number 601 To 608 By Defult After Reset>

5.Full System Reset :- #*3055 0000 #
....................................
<All Remove Configuration File>

6.New Flexible Number Programing :- #*3055 9 1 201 #
....................................................
<First Enter System Password Then 9 For Enter Programing Mode then 1 Means 1 Port No 
then 3 Digits New Extention No 201 202,203,204 so on Then #> 

7.Dialing ON And OFF :- #*3055 40 1 6 #  #*3055 40 1 1 #
.........................................................
<Outside Call Co Line Dialing OFF Firts Enter System Password Then 40 Means Enter Program Mode
then 1 Means Port No 6 Means OFF Then #>

<<Outside Call Co Line Dialing ON Firts Enter System Password Then 40 Means Enter Program Mode
then 1 Means Port No 1 Means ON Then #>


8.Incoming Set :- #*3055 3 1 0 1 1234 #
----------------------------------------
<First System Password Then 3 Means Enter Program Mode 1 Means 
First Co Line (0 Means Day Mode 1 Means Night Mode) 1 Means First Co Line Then 1234 Means Port No 
(Fisrt port 1 (201 Ext no) Second Port 2 (02 Ext No) So On 1234)
First 4 Extention Enable Incoming Call Example :- 201,202,203,204

9.Memory dialing :- #*3055 35 01 8777701917 #
---------------------------------------------
<First System Password 35 For enter program Mode 01 Means Memory dialing no 701
Mob No 8777701917 #>

10.Auto Call Back :- #
-----------------------
<Any extention No Busy Then Press # Then Extaintion is free Then Auto Call Back>




				
			
				
					Introduction to Crystal Inspire EPABX
Models (104, 206, 308, 412/414)
Hardware Overview
Default Extension & Trunk Numbers
Installation Guidelines
Programming Mode
Flexible Number Programming
Day / Night Mode
Call Forwarding
Call Transfer
Call Pickup
Call Hold
Conference Call
Hot Line
Do Not Disturb (DND)
Dynamic Lock
Caller ID (CLI)
Paging
Alarm Function
Relay Control
Remote Programming
Troubleshooting
Important Programming Codes
  • Flexible Number Programming – Allows changing extension numbers to match the organization’s numbering plan.
  • Day / Night Mode – Switches the PBX between day and night operation with different call routing settings.
  • Call Forwarding – Automatically redirects incoming calls to another extension or destination.
  • Call Transfer – Transfers an active call from one extension to another.
  • Call Pickup – Lets a user answer a ringing call from another extension.
  • Call Hold – Places an active call on hold while attending another task or call.
  • Conference Call – Connects multiple parties into a single conversation.
  • Hot Line – Automatically dials a pre-programmed extension or number when the handset is lifted.
  • Do Not Disturb (DND) – Prevents incoming calls from ringing at the extension.
  • Dynamic Lock – Temporarily locks an extension to prevent unauthorized use.
  • Caller ID (CLI) – Displays the caller’s phone number on compatible telephones.
  • Paging – Broadcasts announcements to one, multiple, or all extensions through the PBX.
  • Alarm Function – Provides reminder or wake-up alarms at a programmed time.
  • Relay Control – Operates external devices (such as door locks, gates, bells, or lights) using the PBX relay output.